Panasonic AK-HC3800G Operating Instructions Manual page 13

Parts and their functions
43.
Menu switch <MENU>
When this switch is pressed, the camera's USER menu screen
appears ([OPERATION]/[MAINTENANCE] menu).
When it is pressed again, the menu screen display is cleared.
44. JOG dial button <SELECT>
Turning the JOG dial while the menu screen is displayed moves the
cursor to the setting items. The menu settings can be confirmed with
this dial button.
For details on the menu operations, refer to the section on the menu
operations (→ page 21).
45.
Electronic shutter selector switch <SHUTTER>
Set this to ON when the electronic shutter is to be used. When it is set
to the SEL position, the shutter speed is switched within the preset
range.
It cannot be used when the CCU is connected to this unit.
46.
AWB/ABB start switch <AUTO W/B BAL>
Use this for making automatic white balance adjustments (AWB) or
automatic black balance adjustments (ABB).
It cannot be used when the CCU is connected to this unit.
47.
Lens connector <LENS>
Connect the lens cable to this connector.
48.
Front MIC1 connector <MIC1(FRONT)>
Connect a microphone (optional accessory) here. When using the
microphone, set the MIC1 selector switch to FRONT.(→ page 15)
The power for the microphone is supplied from this connector,
enabling use of a phantom or AB powered microphone. Turn the
power off when connecting a microphone and then configure the
settings to match the microphone after connecting the microphone.
49.
Viewfinder connector <VF>
Connect the color viewfinder (AJ-CVF100G) or 50.8 mm (2-inch) HD
viewfinder (AJ-HVF21KG) cable to this connector.
50. Rear viewfinder connector
Connect the 17.8 cm (7-inch) LCD viewfinder (AK-HVF70G).
Use this D-sub connector for the viewfinder interface.
(continued)
50 49
48
47
46 45
44 43
13