Caring For The Ma-21 Slide-Mount Adapter - Nikon SuperCoolScan 5000ED User Manual

Clean the rollers
5
Using a dry cotton swab or a swab that
has been lightly dampened with water
and wrung out, clean the rollers while
turning the toothed wheel slowly in
either direction with the ball of your
thumb. Excessive force or the use of a
screwdriver or other rigid object could
damage the wheel. Dry the rollers with
a dry cotton swab or leave the roller
frame open until the rollers dry.
Clean the sensors and feed mechanism
6
Remove dust from the interior of the
adapter with a blower. Clean the three
sensors and the feed mechanism thor-
oughly, changing the angle of the blow-
er to reach all parts of the mechanism.

Caring for the MA-21 Slide-Mount Adapter

Storage
When the adapter is removed from the scanner, store it in a well-ventilated area where the
temperature is between –10 °C (14 °F) and +50 °C (+122 °F) and the humidity less than 60%.
Do not store the adapter where it would be subject to sudden temperature changes or con-
densation.
Cleaning
Use a blower or a soft dry cloth to remove dust, a soft cloth lightly dampened with neutral
detergent or liquid soap to remove tougher stains. Do not use alcohol or other volatile chemi-
cals.
Toothed
wheel
Sensors
Rollers
Roller
frame
55