Hard Floor Cleaning - Vax VPPST1600 User Manual

Operation

Hard floor cleaning

For hard floor cleaning, press the rocker switch on the combination floor head to lower the brushes.
Cord rewind
To rewind the power cord, press the cord rewind button located on the top of the vacuum cleaner, and guide the power cord with
one hand. Rewind 1-1½ metres of cord at a time. This will prevent the cord from whipping which could cause damage or injury.
Carry handle
Use the carry handle located at the rear end of the vacuum cleaner to move from room to room.
Hose storage
For convenience there is a parking slot located at the rear of the vacuum cleaner where the floor tool and hose can be parked
for carrying and storage.
Accessories
1. The accessories can be attached directly to the handle by removing the telescopic tubes and pushing in the desired accessory.
2. The accessories can also be attached to the telescopic extension tube for extra reach. Remove the combination floor head
and push on the desired accessory.
2-in1 tool (Upholstery & Dusting Brush)
Dusting brush: for delicate surfaces Upholstery tool: for carpet, upholstery and stairs etc.
Crevice tool
For crevices, corners and cracks, etc.
6
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900