Table of Contents
Advertisement
W90-RU & W89-RU Series User Guide v1.3.qxd:User guide
---
FAQs
FAQs
WARNING: To reduce the risk of personal injury, unplug the carpet washer
!
before performing maintenance/troubleshooting checks.
8
vax.co.uk
PROBLEM: The cleaner won't run.
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in firmly.
Cause:
No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution: Push on/off switch to 'on' .
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Dirty water tank is full.
Solution:
Switch off and unplug cleaner. Empty dirty water tank as shown on page 6.
Cause:
Dirty water tank not installed correctly.
Solution:
Refer to page 6 for fitting information.
Cause:
Obstruction in hose/nozzle.
Solution:
Remove hose and clear obstruction.
PROBLEM: Liquid escaping from the carpet washer.
Cause:
Dirty water tank is full.
Solution:
Switch off and unplug cleaner. Empty dirty water tank as shown on page 6.
Cause:
Dirty water tank not installed correctly.
Solution:
Refer to page 6 for fitting information.
Cause:
Solution tank not installed correctly.
Solution:
Make sure the tank is securely locked in place
PROBLEM: Clean solution won't dispense.
Cause:
Solution tank not installed correctly.
Solution:
Make sure the tank is securely locked in place.
Cause:
Solution tank empty.
Solution:
Refill tank. Refer to page 4/5 for instructions.
Cause:
Handle not fitted correctly.
Solution:
Ensure handle is fitted correctly.
AU: 1300 361 505 / NZ: 0800 800 900
1/2/11
12:41
Page 11
Vax Service line
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Rapide Spring Clean VCWRS700 and is the answer not in the manual?
Questions and answers