Pioneer DVR-550H-S Operating Instruction page 31

Getting started
ENTER
2 Highlight 'Postal Code'.
REC MODE
AUDIO SUBTITLE ANGLE
PLAY MODE
ENTER
3 Enter your postal
code.
The system uses your postal code to identify
which TV listings data is correct for the area
in which you live, so it is important that you
enter it correctly.
4 If you are using an external receiver
(such as a satellite receiver) with the
supplied G-LINK cable, complete this
step, otherwise jump to step 5 below.
• See Connecting to a cable box, satellite
receiver or digital terrestrial receiver on
page 18 for more on using the supplied
G-LINK cable.
• Select External Receiver 1, 2 or 3, then
press ENTER. (If you have just one
external receiver, use External Receiver
1. You can add further receivers in 2 and
3 if you need to.)
After pressing ENTER:
• Select your reception method
(Terrestrial, Cable or Satellite).
• Select your provider (if applicable).
• Select the brand of your external
receiver.
• Identify which input your external
receiver is connected to.
After completing these steps the recorder
will try and communicate with your external
receiver and change the channel via the G-
LINK cable. If the channel was successfully
changed, select Yes to confirm.
If the channel did not change, select No. The
GUIDE Plus+ system will try other codes
assigned to your external receiver. If none of
the codes changes the channel
successfully, tune your external receiver to
the host channel for your country (refer to
step 5 below) and leave it on overnight. The
04
31
En