Smeg Dishwasher Instruction Manual page 17

5 T R O U
The dishwasher can to signal a number of malfunctions by turning on various
n i d c i t a r o g i l h , s t s a
FAULT
E1
E2
E3
E4
E5
Rev. 0.1
USER INSTRUCTIONS
B L E S H O O T N I
d e c s b i r e d b e o l w s (
Acquastop failure
The anti-fl ooding system has tripped (only for models
fi tted with this feature). Activates in case of water leaks.
Contact the technical assistance service.
Safety level
The system limiting the water level in the dishwasher
has tripped. Interrupt the current program. Switch off
the dishwasher, switch it back on again, program a new
cycle and press start. If the problem persists, contact
the technical assistance service.
Water heating malfunction
The water is not heated or is incorrectly heated. Repeat
the washing program; if the problem persists, contact
the technical assistance service.
Water temperature monitoring malfunction
Interrupt the current program. Switch off the dishwasher,
switch it back on again, program a new cycle and press
start. If the problem persists, contact the technical
assistance service.
Water intake malfunction
The appliance does not take in water or does so
incorrectly. Make sure the water connections are
correct, that the water supply tap is open and that the
fi lter is not clogged. If the problem persists, contact the
technical assistance service.
G
e e o f o l l w n i g a t l b : ) e
DESCRIPTION
EN
Tab. 5-01a
15