Advertisement
CleaNHEAD
Use everyday
– anywhere, anytime!
Have a Question?
Please do not return this product
to the retailer.
Call Us First!
Our customer service and product
experts are ready to answer ALL your
questions.
Please call our TOLL-FREE customer
service number at: 1-800-472-7606
or visit us online at
www.conaircanada.ca
Instructions for Care and Use
Model HG300C
IMPORTANT SAFETY
INSTRUCTIONS
™
When using electrical appliances, especially
when children are present, basic safety precau-
tions should always be followed, including the
following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
cally live, even when the switch is off.
To reduce the risk of death or injury by electric
shock:
1. Unplug this appliance before cleaning.
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not use while bathing or in a shower.
4. Do not place in, or drop into, water or other
liquid.
5. Do not reach for an appliance that has fallen
into water. Unplug immediately.
6. Always unplug this appliance from electrical
outlet immediately after using.
DO NOT REACH
INTO THE WATER
—
any appliance is electri-
Advertisement
Table of Contents
Related Manuals for Conair CleanHead HG300C
Summary of Contents for Conair CleanHead HG300C
-
Page 1: Keep Away From Water
ALL your outlet immediately after using. questions. DO NOT REACH Please call our TOLL-FREE customer service number at: 1-800-472-7606 INTO THE WATER or visit us online at www.conaircanada.ca Instructions for Care and Use Model HG300C... -
Page 2: Limited Five Year Warranty
LIMITED FIVE YEAR WARRANTY Conair will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service centre listed below, together with your purchase receipt and $5.50 for postage and han-... - Page 3 toward one another to THIS UNIT HAS NICKeL-MeTAL HYDRIDe BATTeRIeS. IN AN eFFORT TO PROTeCT THe release the cutting assem- eNVIRONMeNT, THeSe BATTeRIeS SHOULD bly. Be ReMOVeD AND PROPeRLY DISPOSeD OF WHeN THe UNIT IS NO LONGeR OPeRATING. TO 4. Lift cutting assembly off ReMOVe THe BATTeRY BLOCK FOR DISPOSAL the shaving head.
-
Page 4: User Maintenance Instructions
USER MAINTENANCE INSTRUCTIONS Trimmer attachment DETACHABLE SHAVING HEAD You will need to remove the shaving head in order to clean the cutting assembly, and before installing the trimmer attachment. The shav- ing head contains the cutting assembly of the Taper control CleanHead™... - Page 5 clean up the hairline. To trim around the ear, hold Cover the clipper on its side, fac- ing down, and use the corner Angled shaving foils/ of the trimmer in an arching attachement motion to get a clean edge to the hairline around the ear.
- Page 6 slide the trimmer up from the bottom of the hairline while gently pulling away from the head as you go and finish with a scooping motion. Repeat this around the back and sides of the head. Next, attach the 3/8" attachment and run the CleanHead over the top...
-
Page 7: Before You Start
BEFORE YOU START 4. Do not use excessive pressure – let the cut- 1. The first time you use your CleanHead , place ™ ting system do the work. If skin turns red or gets the unit in the charging stand so the domed irritated, this means you are pressing too hard. - Page 8 Use on Alternating Current (120V AC 60Hz) it has been dropped or damaged, or dropped only. into water. Return appliance to a service cen- Congratulations on your Conair CleanHead ™ ter for examination and repair. purchase. This innovative product will help you 5.
Need help?
Do you have a question about the CleanHead HG300C and is the answer not in the manual?
Questions and answers