AIS
The marine Automatic Identification System (AIS) is
a location and vessel information reporting system.
It allows vessels equipped with AIS to automatically
receive position, speed, course and vessel identity
information from other AIS-equipped vessels.
If an AIS device is connected, all targets detected
by the device can be displayed.
AIS Setup
Before using AIS, your unit must be set to the same
Baud rate as your AIS device.
NOTE: Your unit must be set to Advanced
mode to access NMEA 0183 settings.
To select a Baud rate:
1. Access the settings menu.
2. Select NMEA 0183.
3. Access the Baud rate
dropdown menu on the
NMEA
0183
dialog.
4. Select the same Baud
rate used by your AIS
device.
5. Select Save.
25
settings
AIS |
Elite-4m HDI