9. After the recovery session is completed, the series of beeps will end, and the
system will automatically turn off. Remove the disc from the optical drive
before the system completely turns off.
10. Repeat step 1 through step 4.
11. Move the Clear CMOS /Recovery jumper back to the standard position (pin 1
and pin 2).
12. Reconnect any cables that were disconnected and reinstall the PCI card if
removed.
13. Reinstall the computer cover and reconnect any cables that were disconnected.
14. Turn on the computer to restart the operating system.
Chapter 5. Updating system programs
63