Electro Industries FiberCom User Manual

FiberCom 10/100BaseT to 100BaseFX Bridging Media
1. Overview
Electro Industries' FiberCom 10/100BaseT to 100BaseFX Bridging Media Converter (part # EI-FP-
8110SA-25) provides 10/100Mbps communication between Cat 5 twisted pair Ethernet cables and Fiber
Optic cables. The FiberCom protects your copper-wire investment, while extending the range of your
communication capability and preparing your network for future optimization.
FiberCom features include:
•
Support for half-duplex and full-duplex transmission.
•
Ability to extend range of communication from 1000 meters maximum (with twisted pair alone) to 80
kilometers.
•
Built-in switching core to implement flow control and reduce broadcast packets.
•
Support for the transmission of extra long packets (1600 bytes) over VLAN.
•
Built-in 128kB RAM for data buffering.
•
Support for auto MDI-MDIX function for seamless device connection.
•
Support for link pass-through function (LPF) for fault detection.
•
Fiber optic immunity to electromagnetic interference (EMI) improves data transmission, especially in
environments with high EMI, e.g., a manufacturing facility's plant floor.
IMPORTANT! Inspect your FiberCom package to ensure it contains the following items:
1. FiberCom Media Converter
2. External Power Supply

2. Specifications

Parameters
Access mode
Standards
Wavelength
Transmission distance
Port
Conversion mode
Delay
Bit error rate
MTBF
LED
Power
Power consumption
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Dimensions
Converter
User's Manual
10/100 Mbps Gigabit Ethernet
IEEE802.3 10BaseT Ethernet, IEEE802.3U 100BaseTX/FX Fast
Ethernet, IEEE802.1Q VLAN, IEEE802.1p CoS, IEEE802.1D
Spanning Tree MAC Bridges
850nm/1310nm/1550nm
Dual-fiber single-mode: (32.8k to 393.7k)feet/
(10/20/40/60/80/100/120)Km; Single-fiber single-mode: (32.8k to
262.5k)feet/ 10/20/40/60/80Km Category-5 twisted pair: 328
feet/100m
One RJ45 port: Connected to STP/UTP Category-5 twisted pair
One fiber port: Dual-fiber single-mode – ST fiber port (fiber size:
9/125µm)
Medium conversion
<10µs
<1/1000000000
100,000 hours
See chart on the next page
90-265VAC Input using external power supply/ 5VDC Input jack
5W
(50 to 131)°F/(10 to 55)°C
5%~90%
(-40 to 158)°F/(-40 to 70)°C
5%~90% (non-condensing)
1.02"/26mm(H)*2.75"/70mm(W)*3.69"/94mm(L) (height * width *
length)
Specifications