D-Link DSL-4730B User Manual page 6

Rear Panel
Interface/Button
RJ-11 interface that connects to the telephone set through
DSL
the telephone cable.
Ethernet RJ-45 interfaces that connect to the Ethernet
LAN4/3/2/1
interfaces of computers or Ethernet devices.
WLAN Button to enable or disable WLAN.
Reset to the factory defaults. To restore factory defaults,
keep the device powered on and push a paper clip into
RESET
the hole. Press down the button for one second, and then
release.
ON/OFF Power on or off.
Interface that connects to the power adapter. The power
POWER
adapter output is: 12 V DC, A.
WPS (on the
WPS button to setup connection to client.
side panel)
DSL-2730B User Manual
Description
3