Console Port Configuration - ZyXEL Communications NWA5560-N User Manual

NWA Managed Access Point User's Guide
Without PoE
1. Connect the NWA to to an upstream switch or directly to the NXC-
5200 Wireless LAN Controller.
2. Connect the NWA to an appropriate power outlet and turn on the
power.

Console Port Configuration

The NWA is pre-configured, but you may use the console port to
manually configure the NWA if necessary. Connect a PS-2 console cable
from the console port on your computer to the console port on your
NWA. Run a terminal emulation program such as HyperTerminal, with
the following settings:
5