Fujitsu ETERNUS DX80 S2 Manual page 4

Drive Enclosure (2.5inch) (Product ID: ETCAD
Drive Enclosure (3.5inch) (Product ID: ETCAD
□ Drive enclosure (x 1)
Drives that are purchased at the same time as the ETERNUS DX Disk
storage system are preinstalled according to the installation rules.
● 2.5inch
● 3.5inch
□ Flange cover (x 1)
□ QSFP cable
QSFP↔QSFP (0.75m)
One QSFP cable is provided when
Two QSFP cables are provided when
*1: An alphanumerical character is used for
1 : one I/O module
2 : two I/O modules
a CU, ETEAD
DU, ETEAD
a
a
for the product ID is "1".
a
for the product ID is "2".
a
to indicate the number of I/O modules.
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
(*1)
a CU )
(*1)
DU )
a
□ Rack rail kit
□ Rack rail (x 1 set)
□ Plate (x 2)
□ M5 screw (x 4)
for mounting the enclosure
□ AC200V cable (x 2)
IEC60320-C13↔NEMA L6-15P (4m)
4
□ Bracket (x 2)
□ Washer (x 8)
□ M5 screw (x 8)
for attaching the rack rails
P3AM-4872-11EN