Casio Verizon G’zOne COMMANDO 4G LTE User Manual page 225

Data usage alert: Your phone will alert you when your mobile data
usage reaches the amount you selected.
Data statistics: By enabling this feature, power consumption will
increase on high data rate networks such as LTE...
Data usage cycle: Displays your current data usage cycle. Tap the
dropdown menu to change the cycle date.
More...
VPN:
Add VPN network: Opens a screen that prompts you to select the
type of VPN to add. You are then prompted for VPN configuration
details.
USB tethering: You can tether your phone to a PC with a USB cable,
to share phone's internet connection with PC.
NFC: This feature is used to read and exchange tags. When used
in conjunction with Android Beam, your device can be used to beam
application content when NFC-capable devices are tapped.
Android Beam: This feature (when activated via NFC) allows you to
directly beam application content to another NFC-capable device
when they are in direct contact. These files are typically small such as
Contact entries.
Wi-Fi direct: Check if you want to allow your phone to connect to other
Wi-Fi direct devices directly.
Wi-Fi direct settings: You can configure your device to connect
directly with other Wi-Fi capable devices. This is an easy way to transfer
data between devices. These devices must be enabled for Wi-Fi direct
communication. This connection is direct and not via a HotSpot or WAP.
Mobile networks: Opens a screen to set up options for roaming,
networks, and APNs (Access Point Names).
223