Table of Contents
Advertisement
Starting the Engine
1.
Sit on the seat.
2.
Raise the mower deck by pushing the release button on
the top of the lifting lever. Pull the lifting lever backward to
the locked (transport) position.
3.
Activate the park brake by pushing the release button in
and pulling the lever fully upwards.
4.
Disengage the mower blades by pressing the blade
switch downwards.
OPERATION
5.
Move the steering controls outward to the locked (outer)
neutral position.
6.
Move the throttle lever to the full throttle position.
NOTE: There is a detent at the full throttle position to aid in
setting the control.
If the temperature is below 32
up to the cold weather (snowflake) starting position.
When the engine has started, move the throttle lever back
to full throttle detent and allow the engine to warm up for a
short period before operating the unit. Failure to move the
throttle from the cold weather starting position will result in
poor engine performance, smoke and spark plug fouling.
17
F, move the throttle lever
O
Advertisement
Table of Contents
