Toroidal Ferrite Core - Samsung HT-F9730W User Manual

Getting Started

Toroidal Ferrite Core

For the Power Cord
<SWA-6000>
If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make two loops in the power cord.
3. Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.
For the Speaker Cable
<SWA-6000>
SWA-6000
Make 3 loops in each of the speaker cables connected to the REAR L and REAR R terminals of the wireless receiver
(SWA-6000) and attach the ferrite core in the same way as step 3 above.
Main Unit
1. Open the ferrite core by pulling up the tab.
2. Make two loops in each speaker cable.
3. Attach the ferrite core to the arranged cables and press to close it until you hear a click.
• Attach the ferrite core as close to the main unit as possible.
12
|
English
POWER
<Main Unit>
FM ANT
CENTER FRONT FRONT TOP
L L
OPTICAL
ASC IN
SUBWOOFER FRONT FRONT TOP
R R
DIGITAL
IMPEDANCE : 3
AUDIO IN
<Main Unit>