Listening To Bluetooth Enable Devices; Bluetooth One Touch Connection Via Nfc - Sharp XL-HF202PH Operation Manual

Bluetooth one touch connection via NFC (continued)
■ NFC tag set up
The NFC tags can be placed anywhere convenient to you.
The velcro tapes supplied will help to secure the tags onto
the desired location.
Caution :
Make sure that the NFC tag is placed on a flat and level
●
surface.
If you choose not to use the velcro tape, do not place
●
the NFC tag near metal surface to avoid connection
interference during tagging.
Important:
NFC tag has unique ID for each individual set, SHARP
●
provides 2 identical tags for your convenience.
SHARP will not be held liable for the damages caused
●
by rewriting the tags.
Keep all small parts away from children as they may
be accidentally swallowed.
1
Peel the separator off the velcro tape (loop type) and
stick it on a desired surface.
Separator
Velcro tape
(loop type)
2
Peel the separator off the velcro tape (hook type) and
stick it to the rear of the NFC tag. Then place the tag
onto the desired location.
Velcro tape
Separator
(hook type)
Rear view of the NFC tag
Listening to Bluetooth enabled devices
■ Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
●
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the
●
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
■ NFC connection for audio playback
Check that:
● Your device (smartphone / tablet) has an NFC function.
● NFC function on your device is turned on.
● Screen lock function of the device is off.
● This unit is not in Eco mode.
1
Touch your device to the supplied NFC tag.
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
● The 'connected' message appears when the connec-
tion is complete.
3
Playback will start automatically. Otherwise, press play
(on remote control or source device).
● Sound will be heard from the speakers of this unit via
audio streaming.
● Your device and NFC tag must be within 10 meters
from the unit.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
● To listen to audio via Bluetooth connectivity without NFC
tag - refer "Pairing with other Bluetooth source de-
vices" on page 8.
● To disconnect, simply touch your device to the tag again.
E-7
NFC tag