Husqvarna MZ52LE Operator's Manual page 28

8. Press in and turn the ignition key to the start
position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
9. When the engine starts, immediately release the
ignition key back to the run position.
10. Slowly push in the choke control knob, if it was
used to start a cold engine.
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth
defects or other reproductive system
damage. The engine exhaust contains
carbon monoxide, which is an odorless,
colorless, poisonous gas. Do not use the
machine in enclosed spaces.
11. Set the engine speed with the throttle. Allow the
engine to run at a moderate speed, approximately
mid throttle, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
(no choke).
28
OPERATION
Turn to the start position
Return to run position
Set the throttle
8050-780
8050-781
8058-216