ZyAIR Wireless LAN Utility
4.6
The MAC Filter Screen
The MAC Filter screen allows you to configure the ZyAIR to give exclusive access to (Accept) devices or
exclude devices from (Reject) connecting to the ZyAIR. Every Ethernet device has a unique MAC (Media
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
device(s) to configure this screen.
Figure 4-5 Access Point Mode: MAC Filter
The following table describes the labels in this screen.
4-8
Access Point Mode Configuration