Table of Contents
Advertisement
McAfee® Network Security Platform 6.0
Network Security Platform fail-closed dongle specification
The I-1200 and I-1400 Sensors require the dongle specified in Figure
Security Platform
connection. Configurations requiring the dongle are described in the Sensor
chapter on cabling the Sensor.
Figure 22: Fail-Closed Dongle Specification
Console port pin-outs
McAfee supplies a console cable. The specifications for this cable are as follows:
The Console port is pinned as a DCE so that it can be connected to a PC's COM1 port
with a straight-through cable.
Auxiliary port pin-outs
The Auxiliary (Aux) port is pinned as a DTE so that it can be connected to a modem with a
straight-through cable.
Fail-Closed Dongle Specification for all monitoring modes requiring a fail-closed
Pin #
Signal
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
Pin #
Signal
Direction on Sensor
Output
Output
Input
Input
not applicable
Output
Input
Output
Not applicable
Direction on Sensor
42
Adding a Sensor
®
McAfee
Network
Product Guide
Advertisement
Table of Contents
