Failed_To_Send_Command (Id: 00200251); Resumed_Compressed_File_Transfer (Id: 00200252); Blocked_Filetype (Id: 00200253) - D-Link DFL-260E Reference Manual

2.1.105. failed_to_send_command (ID:
00200251)

2.1.105. failed_to_send_command (ID: 00200251)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters

2.1.106. resumed_compressed_file_transfer (ID: 00200252)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.107. blocked_filetype (ID: 00200253)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
NOTICE
FTPALG:Failed to send the command.
The command sent by the ALG to the server could not be sent.
none
None.
1
ALG Module Name
WARNING
FTPALG: The file <filename> (File type: <filetype> ) cannot be sent
to antivirus scan engine.
The data cannot be sent to AVSE for scanning since file transfer
begins from within the middle of the file. The scanning process will
fail for compressed files.
data_blocked_control_and_data_channel_closed
Change fail mode setting to allow, if resumed file transfers of
compressed files should be allowed.
2
filename
filetype
ALG Module Name
ALG Session ID
NOTICE
FTPALG: Requested file:<filename> is blocked as this file is
identified as type <filetype>, which is in block list.
The file is present in the block list. It will be blocked as per
configuration.
data_blocked_control_and_data_channel_closed
If this file should be allowed, update the ALLOW/BLOCK list.
2
filename
78
Chapter 2. Log Message Reference