Casio 2958 Operation Manual

MA0506-EA
About This Manual
General Guide
• Press C to change from mode to mode.
• In any mode, press B to illuminate the display.
Timekeeping Mode
Timekeeping
PM indicator
Day of week
Hour : Minutes
Year
Month – Day Seconds
To set the time and date
Home time zone
Seconds
Flash Alert
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen To do this:
50 Reset the seconds to
OFF Toggle between Daylight Saving
Time ( ON ) and Standard Time (
Specify your Home Time zone
P 10:58 Change the hour or minutes
Change the year
6-30
Change the month or day
• For details about time zones, see the "City Code Table".
• See "Daylight Saving Time (DST)" for details about DST setting.
• For information about Flash Alert, see "Flash Alert".
4. Press A to exit the setting screen.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
Operation Guide 2958
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
World Time Mode
Press .
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a Home Time zone before you set the time and
date.
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
DST Home Time Zone
Day Month Year Minutes
Do this:
Press D.
00
Press D.
OFF )
Use D (eastward) and B (westward).
Use D (+) and B (–).
Stopwatch Mode
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
• The P indicator is not displayed when the current time is displayed in other modes.
World Time
City code Timekeeping
Hour
Mode time
Current time and date
in the zone of the selected
city code
To toggle a city code time between Standard Time and Daylight Saving Time
DST indicator
Countdown Timer Mode Alarm Mode
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time
( ON displayed) and Standard Time ( OFF
4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
World Time shows the current time in 48 cities (29 time
zones) around the world.
• All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
To view the time for another city code
In the World Time Mode, press D to scroll eastwardly
through city codes.
• For full information about city codes, see the "City Code
Table".
• If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make necessary changes.
1. In the World Time Mode, use D to display the city code
(time zone) whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time (DST displayed) and Standard Time (DST
not displayed).
• The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
• Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
displayed).
1