• Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Welcome Congratulations on the purchase of your new Wireless Laser Mouse. The Wireless Laser Mouse is compatible with IBM® and compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP, Vista™. Features and Benefits A 1600 dpi laser sensor scans the desktop surface for ultimate precision and accuracy.
Installation Procedures Insert the batteries into the Turn the mouse on using the Turn your PC on. Connect the USB connector of the mouse paying close attention to power switch located RF receiver into an available USB proper polarities. underneath the mouse. port on your PC.
Programming the Buttons Click Start ⇒ Programs ⇒ Micro Innovations ⇒ Mouse Suite v1.2. The following icon will appear in the lower right-hand corner of your computer screen. Click the icon and select the Programmable Button tab.
Troubleshooting Problem Resolution Cannot launch Mouse Settings Try re-installing the software CD. Note: You may need to uninstall any previous mouse software on your PC. Make sure the ON / OFF switch is in the ON position. Restart your PC. Batteries may have been consumed (drained).
The batteries that ship with this device are not rechargeable. Do not try to recharge them. • There are no user serviceable parts. Only Micro Innovations may service or repair this product. • For technical assistance visit www.microinv.com or call toll free: 1-877-550-5534...