Foxconn A7DA 3.0 Series User Manual page 26

This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are
also provided.
You have to run the Setup Program when the following cases oc-
cur:
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :
■
■
■
■
■
■
■
■
■
■
■
■
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.
Enter BIOS Setup
Main Menu
System Information
Green System Mode
Advanced BIOS Features
Fox Central Control Unit
Advanced Chipset Features
Integrated Peripherals
BIOS Security Features
Load Optimal Defaults
Save Changes and Exit
Discard Changes and Exit