Summary of Contents for Conair PROFESSIONAL DPP3000 Series
Page 1
™ Digital Steam Iron User Guide DPP3000 / DPP4000 Series 7 Setting LCD For your safety & continued enjoyment of this product, always read the instruction booklet carefully before using...
IMPORTANT SAFEGUARDS When using your iron, basic precautions should always be fol- lowed, including the following: READ ALL INSTRUCTIONS BEFORE USING Use iron only for its intended use. To protect against a risk of electric shock, do not immerse the iron in water or other liquid. The iron should always be turned Off before unplugging from an outlet.
Page 3
Please be sure to read the following instructions carefully before you use your Conair Digital Steam Iron for the first time. Once you have familiarized yourself with this appliance, please save this instruction manual for future reference.
Page 4
Soleplate The soleplate on this iron has a curved design at the tip which makes it much easier to press between shirt buttons, and around collars and other details on your garments. 4-way Automatic Shutoff This iron will shut down if left motionless on its heel, on its side, facedown or if dropped.
Page 5
3. Plug the iron into a 120V electrical receptacle. Make sure that no other high wattage appliances are plugged into the same circuit. 4. Press the power on/off button. You will see the following message on the display: “Hello, please select fabric setting by pressing up or down button”.
Page 6
If there is obvious damage or if you hear any loose parts or suspect the iron has been damaged, contact Conair Customer Service at 1-800-472-7606 to arrange for serv- ice. Be extremely cautious if you have dropped the iron. Until unplugged exposed electrical components could cause an electric shock, serious injury or death.
If you need to clean the iron, unplug and allow to cool. Use a slightly damp cloth and wipe down the outside of the iron. Do not use cleaning agents or place the iron in water or cleaning fluids. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down or use vertical Burst of Steam –...
Page 8
Clothing Iron Unique Features This iron has been designed with some new features not previously available on steam irons. Please take some time to familiarize yourself with them: Electronic OneTouch™ Control This control system provides precision temperature control to greatly improve fabric-pressing performance.
setting without shutting off and cooling down. In this setting the iron will still shut down if left motionless face down or on its side, or if dropped. *NOTE: WHEN THIS FEATURE IS ACTIVATED, THE IRON WILL NOT SHUT OFF IF LEFT MOTIONLESS WHEN RESTING ON ITS HEEL (SEE IMAGE) To activate the Crafters’...
Page 10
shot through the fabric. Too many bursts in a row will cool the sole- plate and take the iron out of the appropriate temperature setting. After a few bursts, check the “dots” display. If the dots are not in the display, the iron is not at the correct temperature.
TROUBLESHOOTING Iron does not heat • Make sure that the iron is plugged in and turned on. Make sure to select a fabric. • The automatic shutoff may have activated: Move the iron to reset and begin heating. Iron does not steam •...
Page 12
LIMITED ONE YEAR WARRANTY Conair will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service centre listed below, together with your purchase receipt and $7.50...