Table of Contents
Advertisement
6.
PCI Express slot setting (3-pin PCIE2_SW1; PCIE5_SW1)
These jumpers allow you to turn off slot 1 or 4 no matter slot 2 or 5 is
occupied or not. Place the jumper caps on pins 1–2 to let the system detect if
the slot 2 or slot 5 is occupied, and turn off slot 1 or 4 automatically (default).
Or you can place the jumper caps on pins 2–3 to turn off slot 1 or 4.
7.
IPMI setting (3-pin IPMI_SEL1)
This jumper allows you to use the IPMI feature through the dedicated LAN
or share LAN. Place the jumper caps on pins 1–2 if you want to use IPMI
through the dedicated LAN (default). Or you can place the jumper caps on
pins 2–3 to use IPMI through the shared LAN.
ASUS KGPE-D16
2-29
Hide quick links:
Advertisement
Table of Contents
