Qr (Quick Recall) Function - Nikon F70 Instruction Manual

QR (QUICK RECALL) FUNCTION

Settings for film advance mode, focus area, focus mode,
metering system, exposure mode (including Vari-Program),
flash sync mode and exposure compensation function can be
To memorise
1 Confirm film advance mode, focus area, focus mode,
metering system, exposure mode (including Vari-Program)
and flash sync mode set on the camera. If necessary, change
settings as desired.
70
memorised on the F70/F70 's microcomputer for easy recall.
D
Four numbers are provided: 0 for the permanent default
settings; 1, 2 and 3 for the custom settings.
2 Press IN button and confirm "-" appears in the QR window
of LCD panel. While holding IN button, rotate command
dial until your desired custom setting number (from 1 to 3)
appears in the QR window. Remove finger from IN button.
• If you have already customised the QR number and selected
the same number to memorise another customised setting,
the previous settings will be cleared.
To recall
While pressing OUT button*, rotate command dial until "0" or the
number representing your previously memorised settings
appears. Remove finger from OUT button.
* If no QR number is shown in the QR window, "-" appears when you press OUT
button.
• For AF mode, make sure the focus mode selector is set at
AF. With focus mode selector set at M, AF mode cannot be
recalled.
• Recalling QR number 1, 2 or 3 cancels Flexible Program
function. All Mode Exposure Bracketing, Flash Output Level
Compensation and Flash Exposure Bracketing are not
canceled.
About No. 0
QR No. 0 is for the following factory-set initial settings and
cannot be customised.
Film advance mode: Single frame ( )
Focus area: Wide ( )
Focus mode Single Servo AF
Metering system: Matrix ( )
Exposure mode
(including Vari-Program): Auto-Multi Program ( )
Flash sync mode: Normal (If accessory Nikon
Speedlight attached is set
at Rear-Curtain Sync,
Rear-Curtain Sync will be
performed.)
Flexible program setting: Cancel
Exposure compensation Cancel
function
All Mode Exposure Bracketing Cancel
Flash Exposure Bracketing Cancel
Once you have recalled one of the QR numbers (0, 1, 2
or 3), adjusting film advance mode, focus area, focus
mode, metering system, exposure mode, flash sync
mode or exposure compensation value will make the QR
number disappear from the QR window. (This does not
cancel memorisation. To recall the settings again, simply
press OUT button.)
71