Samsung SNV-7080R User Manual page 52

setup screen
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1. Select <Backlight>.
2. Set <Mode> to <BLC>.
3. Set <BLC level>.
You can change the level to adjust the
brightness of the monitoring area.
4. Set the <Top, Bottom, Left, Right>
levels to specify the target area.
HLC (Highlight Compensation) Setup
When a strong light such as streetlamp or headlight faces forward to the camera, you can
mask that exposed area in order to protect it from being saturated.
1. Select <Backlight>.
2. Set <Mode> to <HLC>.
3. Set the <HLC level> and the <Mask
tone>.
• HLC level : Adjust the brightness
level so as to remove the incoming
highlight from a specific condition.
• Mask tone : Adjust the mask tone of
the highlighted area.

M
At night operation, this function will be activated only if the incoming highlight exceeds a certain
area in a low contrast environment.

At night, HLC will not function if the scene is either too bright or too dark.
52_ setup screen