GE FCM5 Owner's Manual & Installation Instructions page 4

Clean the inside of the freezer with a mild solution of baking soda and water (see
Connect cord to power outlet.
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the
Make sure the temperature control is set at
Allow freezer to operate for at least four hours before placing food inside.
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the
4
Freezing temperature selection is made by
setting the control from to (coldest).
If you want colder or warmer temperatures,
adjust the control one step at a time.
The Power-On Light indicates that the freezer
is properly connected to the electrical power.
The key for the spring-loaded lock is
automatically ejected—key will not
remain in lock in either the open or
closed position.
Allow several hours after each one-step
adjustment for the freezer temperature
to stabilize.
Turning the control to the
the cooling process but does not shut off
power to the freezer.
The light glows even when the temperature
control is turned off.
).
position.
position.
position stops