Trouble Or Malfunction; Service - GE 2-9720 Use And Care Manual

TROUBLE OR MALFUNCTION
Should your phone not operate properly, check the following before
seeking service.
PROBLEM
1. No dial tone.
2. Phone does no
ring.
3. Incoming and
outgoing voice
volume too low
or none at all
4.
Light and tone
feedback flutter
when dialing in
Pulse mode.
~
5. Memory Dialing
Problems
6. Loss of Memoo
SOLUTION
Check Cords: Are they inserted properly
and securely?
Are they damaged?
Check HOOK SWITCH: Does it fully extend
when Handset is
removed?
Is RINGER VOLUME SWITCH in OFF
position?
Are you using too many phones on one line?
me total REN of all phones on the same line
should not be greater than the maximum REN
for your calling area. Usually 5. See ("FCC
Registration Information" on back cover.)
Perform checks under #1.
. Are other phones off hmk at same time?
If so, this is normal condition as wlume drops
when additional phones are used simul-
taneously.
This is normal as power is fluctuating when
the phone dails.
Dld you program numbers correctly?
Did you follow proper diating sequence?
(Review Memory Section)
Is 3V Lithium Batte~ in place correctly?
Does it need to be replaced?
9
If still inoperative, disconnect the phone and try another phone Of
one is available) or another cord to determine whather the problem
is in the telephone, the cord or the line. If in the phone, discontinue
its use and follow the SERVICE procedure in this manual. If in the
line, notify the telephone company immediately. The telephone com-
pany will charge for a service call if the problem is attributable to
equipment you own.