Leadtek WinFast 3D S320 User Manual page 25

Select the "Change" button in the "Adapter Type" section; a window with a title name of
Step 7
"Change Display" will appear on your screen.
Step 8 Select the "Have Disk" button; a window with a title name of "Install From Disk" will appear
on your screen.
Step 9 Specify the path X:\S320ii S320ii S320ii\NT40 (X means CD-ROM drive letter) and select the "OK" button in S320ii
the "Install From Disk" window ;Then press "OK" in the "Change Display" window; a
window with a title name of "Third Party Drivers" will appear on your screen.
Select the "Yes" button in the "Third Party Drivers" window.
Step 10
After all new drivers are installed, a message indicating the complete installation of the driver will
Step 11
appear on your screen. Press "OK".
Step 12 Select the "Close" button in the "Display Type" window. Select the "Close" button in the
"Display Properties" window; a window with a title name of "System Settings Change"
will appear on your screen.
Step 13 Remove the diskette from your floppy drive A and press the "Yes" button to restart
Windows NT 4.0.
Step 14 When the system is rebooted, enter "Windows NT 4.0" from the Boot Menu List.
After logon of Windows NT, the "Invalid Display Setting" applet will appear on your screen
NOTE: This window will only appear when you use new display drivers for the first time.
WinFast 3D S320 II User's Manual 21