Leadtek WinFast 3D S320 User Manual page 20

Leadtek Research Inc.. Leadtek Research Inc.. Leadtek Research Inc.. Leadtek Research Inc..
"Other Options" Tab
Select this option to disable the caching of cursors by the
drivers.
If the mouse cursor is improperly displayed or becomes
corrupted while running certain applications, disabling the
cursor cache may correct the problem. If this setting is
changed, Windows must be restarted for new setting to
take effect.
Select this option to disable driver support for enhanced
instructions used by certain CPUs.
Some CPUs support additional 3D instructions that
complement your RIVA TNT
performance in 3D games or applications. This option
allows you to disable support for these additional 3D
instructions in the drivers. This can be useful for
performance comparisons or for troubleshooting.
Allows you to select between two monitor timing
modes:
General Timing formula or GTF General Timing formula General Timing formula General Timing formula GTF GTF is a standard used by GTF
most newer hardware. This is the default setting.
Discreet Monitor Timings Discreet Monitor Timings Discreet Monitor Timings Discreet Monitor Timings or DMT DMT is an older standard DMT DMT
still in use on some hardware. Enable this option if your
hardware requires DMT.
Properties
II and improve