Faq - Leadtek WinFast TV USB Series Quick Installation Manual

FAQ

For WinFast TV USB Series
Q1: If you switch your USB device from one USB port to another one, the system will
ask you to reinstall the driver again.
Answer: Please reinstall the driver from the WinFast Software Pack CD.
Q2: If the USB 2.0 function of the system BIOS is disabled, a black screen will be
shown instead of showing TV programs.
Answer: In order to view TV programs properly, remember to enable the USB 2.0
function in the system BIOS.
For WinFast DTV Dongle
Q1. Why can't my remote control work with the DTV Dongle? It was working last time.
Answer: Perhaps you have switched your DTV Dongle to a different USB port in your
system. For remote control to work properly, reinstall the WinFast DTV Dongle
Infrared driver manually again. Please go to My Computer -> Properties-> Hardware
->Device Manager to check whether the WinFast DTV Dongle Infrared driver has been
installed or not.
Q2: The Boss key on the remote control can be used to hide the WinFast DTV
application, not call up the application.
Answer: In order to call up the application, double-click the WinFast Wizard at the
right-bottom corner of the computer.
Fig 1. Before installation of
WinFast DTV Dongle
Infrared driver
Fig 2. After installation of
WinFast DTV Dongle
Infrared driver
6