Dryer Description; The Front; The Back; Control Panel - Hotpoint TVEL 75 Experience Instruction Booklet

Dryer Description

The front

Drum

Control Panel

Model & Serial numbers
Filter
Control panel
The ON/OFF button : If the dryer is running and
this button is pressed and held for more than 3
seconds, the dryer is turned off. Press and hold again
for more than 3 seconds and the dryer reactivates.
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
The OPTION buttons/lights select available options for
your selected programme. The lights indicate that the
option has been selected. If an option is not available
the buzzer will beep three times (see Start and
Programmes).
The START/PAUSE button/light
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. When a programme is running, holding this

The back

Caution: Hot!
PROGRAMMES
Knob
Indicator
ON/OFF
Buttons & Lights
Button
button in pauses the programme and stops the dryer.
The light is green when programme is running, flashing
amber if the programme has been paused or flashing
green if on standby waiting to start a programme (see
Start and Programmes).
Note: This light also flashes amber during the Post
Care phase of a programme.
The Progress or Delay lights show you the status of
the programme, or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (see Start and Programmes).
The Clean Filter light gives you a reminder before
starts a selected
every programme that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).
Air Intake Vent
Rating plate
Vent Tube fitted here
START/PAUSE
Button & Light
OPTION
Progress or Delay
Clean Filter
Light
Lights
5
GB