Using the "Low Cut" filter
Set the "Low Cut" switch
2
Switch position
Cleaning and maintaining the MKE 600
CAUTION
Damage to the product due to liquids!
Liquids entering the product can short-circuit the electronics or dam-
age the mechanics. Solvents or cleansing agents can damage the sur-
face of the product.
Keep all liquids away from the product.
Only use a soft, dry cloth to clean the product.
4 |
MKE 600
2
to the desired position.
Frequency response of the microphone
linear frequency response
frequencies below 100 Hz are attenuated to
reduce wind and impact noise