Nstalling The Hone; Ordless Ower Orded Andset; Andset B; Connecting The Ac (Electrical) Power - GE 17670 User Manual

Installing the Phone
Choose the best location to install your base and handset charge cradles. Your base
and handset charge cradles should be placed on a level surface such as a desk or
table top, or you may mount the base on a wall.

Connecting the AC (Electrical) Power

1. On the base, plug the power adaptor cord into the power jack on the back of the
base and the other into an electrical outlet.
CAUTION: To reduce risk of personal injury, fire, or damage
use only the 5-2732 power adaptor listed in the user's guide.
This power adaptor is intended to be correctly orientated in a
vertical or floor mount position.
. Plug the handset charge cradle into an electrical outlet.
NOTE: The charge indicator on the handset charge cradle turns on
to indicate the handset battery is charging

Connecting the Telephone Line

On the base, plug one end of the straight telephone line cord into the jack on the back
of the base and the other end into a modular wall telephone jack.
NOTE: If desired, gather the extra telephone line and power
adaptor cord together and store inside the pedestal bracket.
10