GE 82-POE User Manual page 209

Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable [<port-list>]
[no] poe enable [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe enable 1
Switch(config)# show poe status 1
Port Admin
Port1 Enable
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port Admin
Port1 Disable
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Oper Priority Power Limit[W]
on High 15.4
Oper Priority Power Limit[W]
off High 15.4
Chapter 6: Command Line Interface
Current
Current[mA]
Consumption [W]
13.4 279
Current
Current[mA]
Consumption [W]
-- --
Device
Class
0
Device
Class
0
205