GE 82-POE User Manual page 134

Chapter 4: Web-Based Management
Misc Configuration
In this page, you can change the default configuration for the 802.1x standard:
Figure 91: 802.1x Misc Configuration interface
c
This page includes the following fields:
OBJECT
Quiet Period:
TX Period:
Supplicant Timeout:
Server Timeout:
Max Requests:
Reauth period:
130
DESCRIPTION
Used to define periods of time during which it will not attempt to
acquire a supplicant.
Default time is 60 seconds.
Set the period the port waits for retransmit next EAPOL PDU during an
authentication session.
Default value is 30 seconds.
Set the period of time the switch waits for a supplicant response to an
EAP request.
Default value is 30 seconds.
Set the period of time the switch waits for a server response to an
authentication request.
Default value is 30 seconds.
Set the number of authentication that must time-out before
authentication fails and the authentication session ends.
Default value is 2 times.
Set the period of time which clients connected must be re-
authenticated.
Default value is 3600 seconds.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual