GE D-GES7600 Series Installation And Operation Instructions Manual page 34

Manageable 8/9-Port Switch
Step 8:
Press <esc> to a previous screen as shown in Step 3.
Step 9: Admin. Control
Highlight All Ports and press <enter> to configure at one time.
Or move to highlight each port and press <enter> to configure individually.
Step 10:
For Admin Control, move to highlight Up or Down from Admin Status Options.
Step 11:
The port is set as Admin Down to stop TX/RX transmission. To allow transmission on the
port, move to highlight Up from the options in Step 10.
Step 12: Physical Port Address
Press <esc> to a previous screen as shown in Step 1.
Step 13:
Move to highlight Physical Address to view physical port address.
Step 14: Return to Basic Management
Press <esc> to return to [Basic Management] screen when completed.
User's Manual 30