Page 2
MB 200 Congratulations! Your purchase of a new Gallien-Krueger MB Series amplifier is surely the result of much careful consideration on your part. For our part, we at Gallien-Krueger are pleased that you chose us, and are determined that you will be a satisfied customer.
MB 200 Table Of Contents Safety Information________________________ 4 Quick Start______________________________ 5 Front Panel/Rear Panel features____________ 6 Sound Tips______________________________ 7 Installation and Maintenance_______________ 8 Tech Talk_______________________________9 Speci cations___________________________10 *All Features and speci cations are subject to change without notice Please read the Safety Information section on page 4 and installation instructions on page 8 before continuing.
MB 200 Safety Information Please read all enclosed safety precautions AC Power Cord: before connecting or operating this product. To avoid safety hazards, use only the power cord supplied with your unit. If a replacement cord is Verify Line Voltage and Amperage needed, make certain to use a standard IEC compliant cord.
MB 200 Quick Start The MB Series amplifier is designed to be simple 5. Level and Master Volume settings: to operate. All controls have a well defined Set the Master Volume to 3 o’clock. Turn the purpose. These directions will take you through Input Volume knob up as you play to the desired the basics and give you a good start for setting up output level.
MB 200 POWER INPUT -10dB GAIN CONTOUR TREBLE HI-MID LOW-MID BASS MB200 DIRECT OUT SPEAKER HEADPHONES-1 LINE OUT/CHAIN OUT-2 AUX IN POST AC INPUT 200W @ 4 OHMS 100-120V 50/60Hz CLASS 2 WIRING MB 200 Controls Input: A standard 1/4” input jack to connect ring will light red until the condition is corrected.
MB 200 Sound Tips The MB Series has several unique features which, if used properly, will help you obtain the sound you have been searching for. The Equalizer: The equalizer is used to fine tune your sound. When adjusting making adjustments, do it just a little at a time.
MB 200 Installation: Maintenance: To insure proper operation and to avoid potential Your new amplifier is rugged. It was built to give safety hazards, place the unit on a firm, level you a lifetime of trouble-free operation, if it is surface.
MB 200 Tech Talk Characteristics of the MB Series: Cool Running = Reliability: The MB Series is a flexible, state-of-the-art To cool the amp when its being driven hard, we’ve amplifier designed deliver maximum designed a temperature sensitive fan cooling system. When performance while remaining small, lightweight the amp is under a light load, the fan is off or running at a simple to operate.
GAIN POST -10dB pad HEAD PHONES SPEAKON JACK LINE MB200 SPECS Output Power: Dimensions: 140W @ 8 Ohms, Height: 2.50” [63.50mm] ( With Rubber Feet) 200W @ 4 Ohms. Input Section: 1.75” [44.45mm] ( Without Rubber Feet) Maximum Input Level 0.6V Rms...
Need help?
Do you have a question about the MB200 and is the answer not in the manual?
Questions and answers