D-Link Dsl-2730U User Manual - D-Link DSL-2730U User Manual

Appendix A – Troubleshooting
Enter the information in the section. Explanations of parameters are
described below. Click the Apply / Save button to add the entry in the
Active Inbound IP Filtering table.
Filters Parameter
Filter Name Enter a name for the new filter.
IP Version Ipv4/Ipv6
Protocol Select the transport protocol (Any, TCP/UDP, TCP, UDP or ICMP) that will be used for the filter rule.
Source IP Enter the start IP address which you are creating the filter rule.
address[/prefix
length]
Source Port (port or The Source Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or
port:port) Inbound Filter rule.
Destination IP Enter the end IP address which you are creating the filter rule.
address[/prefix
length]
Destination Port The Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or

D-Link DSL-2730U User Manual

Description
54