GE Monogram ZIFI240 Owner's Manual page 9

Tempered glass shelves in the fresh-food
Glass shelves
refrigerator are removable for easy
cleaning or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage to
the gasket. Lift up on the back of the shelf
slightly. Tilt the shelf to one side at an
angle while pulling forward.
Appearance may vary
To remove, lift up on the back of the shelf
QuickSpace ™
This shelf splits in half and slides under
itself for storage of tall items on the shelf
Shelf
below.
Step 1: Lift the back edge of the front half
of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front
half of the shelf while sliding it underneath
the back half.
The entire Quick Space shelf can be
removed and replaced (see Glass Shelves
section).
Loading
• Do not block the thermistor, located
tips and
suggestions
on the right hand side, just above the
third shelf of the fresh-food refrigerator.
Blocking the thermistor could impair the
air circulation and temperature control.
Controls and Features
To replace a shelf, open the door
completely to avoid potential damage
to the gasket. Tilt the shelf to one side
at an angle and slide toward the back wall,
placing one side onto the shelf support.
Place the other side onto the opposite
shelf support. Ensure rear locking tabs
are engaged. When installed properly,
the shelf will not slide forward when
gently pulled.
Tilt the shelf at an angle while removing
or replacing
Fresh-Food Refrigerator
Place in slots when replacing the shelf
Step 1
Step 2
Step 3
9