GE TURBOCOOL 23 User Manual page 11

7/16 Wrench
Screw down the support
leg until it touches the
floor. This will prevent
door misalignment.
About the crispers and pans.
Not all features are on all models.
High
Low
Humidity Humidity
Door Alignment
If doors are uneven, adjust the
refrigerator door.
Using a 7/16 socket wrench, turn
the door adjusting screw to the right
to raise the door; to the left, to lower
it. (A nylon plug, imbedded in the
threads of the pin, prevents the pin
from turning unless a wrench is
used.)
Support Leg
Before moving the refrigerator, you will
need to screw up the support leg. Once
the unit is relocated, you will need to
screw down the support leg again.
Fruit and Vegetable Crispers
Excess water that may accumulate in the
bottom of the drawers should be wiped dry.
Adjustable Humidity Crispers
Slide the control all the way to the
HI setting to provide high humidity
recommended for most vegetables.
After one or two turns of the
wrench, open and close the
refrigerator door and check the
alignment at the top of the doors.
Slide the control all the way to the
LO setting to provide lower humidity
levels recommended for most fruits.
ge.com
11