Tevion 7” Digital Photo Frame User Manual page 5

Setup the frame
STEP 1 Attach the frame stand to the rear panel of the frame, tighten the screw slightly whilst
holding the photo frame stand, then adjust the stand to the desired position. Finally
fasten the screw to hold the stand in place.
STEP 2 Plug the adaptor into the AC outlet, and then insert the DC plug into the frame.
STEP 3 Switch the picture frame ON
Power on/off
POWER ON: Switch the power button to the【ON】 position. The LCD panel will light on.
POWER OFF: Move the power button to the 【OFF】 position. The LCD panel will light off and
the unit will turn into standby status.
Note: If the frame can't read the memory card or USB key, the photo frame will
automatically initiate a slideshow with the manufacturer's pre-loaded pictures.
FUNCTIONS
You can use the cursor keys
PLAY to enter the selected function mode.
Helpline No.: UK/N. Ireland: 08 458 684 540
Web Support: www.unisupport.net
to change selection, and then press either ENTER or
Rep. of Ireland: 076 60 600 29 5
P50505