Gps Software Commands; Trimble Standard Interface Protocol (Tsip) - Microcomputer Systems MSI-P602 User Manual

III. GPS SOFTWARE COMMANDS
A. Trimble Standard Interface Protocol (TSIP)
The Trimble Standard Interface Protocol (TSIP) provides the
system designer with over 20 commands that may be used to
configure a GPS receiver for optimum performance in a variety
of applications. TSIP enables the system designer to customize
the configuration of a GPS module to meet the requirements of
a specific application.
Appendix A, beginning on page 85 of the
Lassen iQ_Reference Manual_Rev b.pdf
(included on the CDROM of this manual), provides the
information needed to make judicious use of the powerful
features TSIP has to offer, to greatly enhance overall system
performance, and to reduce the total development time. The
provided reference tables will help you determine which packets
apply to your application. For those applications requiring
customization see Customizing Receiver Operations, page 89
for a detailed description of the key setup parameters.
Application guidelines are provided for each TSIP Command
Packet, beginning on page 102.
Page 12 MSI-P602 User Manual