Hardware Installation - Dazzle Digital Video Creator 100 User Manual

Hardware Installation

After you install the DVC 100 software, you can install the hardware.
Installing the DVC 100 hardware is an easy, two step process, as described below.
1. Connect one end of the AC power cord to the back of the DVC 100 and the other end
to an electrical outlet.
To avoid damaging your DVC 100, use only the supplied power adapter.
DVC 100
Power Adapte
2. Connect the USB cable (attached to the back of the DVC 100) to the USB port on your
computer.
USB Port
USB Cable
Dazzle Digital Video Creator 100 User's Guide • Getting Started • Page 13