5.4. Visual Components of the LDplus Control System
5.4.1.
Main window
5.4.2.
Status bar
Operating mode
Operating Manual Freeze Dryer ALPHA 1-2 LDplus
The LC display is divided into the three following areas:
1. Main window
2. Status bar
3. Softkey function
Main window
Softkey
function
The main window shows set values and actual values, menus and
process-relevant information.
The status bar shows the current operating mode, the active phase
and other relevant information. The status bar is visible at all times.
Structure of the status bar:
5.4.2.1
Operating mode
•
The freeze dryer is in standby mode. All aggregates are
switched off.
•
The freeze dryer is in run mode. The timer is deactivated.
•
The freeze dryer is in run mode. The timer is activated.
Status bar
Info icon
Active phase
LDplus Control System • 37