Behringer STUDIO CONDENSER MICROPHONE C-3 Specifications page 3

LARGE-DIAPHRAGM STUDIO CONDENSER MICROPHONE C-3
Transducer type:
Polar pattern:
Connection:
Open circuit sensitivity:
Frequency response:
Max. SPL ( < 0,5% THD @ 1 kHz):
Equivalent noise level:
Dynamic range:
Rated Impedance
Supply voltage:
Supply current:
Dimensions:
Weight:
BEHRINGER is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The information
contained herein is correct at the time of printing. The names of companies, institutions or
publications pictured or mentioned and their respective logos are registered trademarks of
their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER
nor affiliation of the trademark owners with BEHRINGER
for any loss which may be suffered by any person who relies either wholly or in part upon any
description, photograph or statement contained herein. Colours and specification may vary
slightly from product. Products are sold through our authorised dealers only. Distributors and
dealers are not agents of BEHRINGER
by any express or implied undertaking or representation. No part of this manual may be reproduced
or transmitted in any form or by any means, electronic or mechanical, including photocopying
and recording of any kind, for any purpose, without the express written permission of BEHRINGER
Spezielle Studiotechnik GmbH. BEHRINGER
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
SPECIFICATIONS
and have absolutely no authority to bind BEHRINGER
®
ALL RIGHTS RESERVED. © 2006
BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38,
47877 Willich-Münchheide II, Germany.
condenser, 16 mm
cardioid, figure 8, omni
gold-plated balanced
XLR connector
-40 dBV/pa (10 mV/pa)
40 Hz - 18 kHz
142 dB
23 dBA (IEC 651)
119 dB
350 Ω
+48 V
7.0 mA
∅ shaft: 54 mm,
length: 180 mm
approx. 0.45 kg
. BEHRINGER
®
is a registered trademark.
®
®
accepts no liability
®
®
3