Power Button; Kneading Massage; Mode Button - HoMedics MCS-210H Instruction Manual And Warranty

Power Button

NOTE: When
To turn on the massage
"POWER" button
is pressed for first- functions, first press
time use, the moving the POWER button.
shiatsu mechanism The L.E.D. indicator will
will automatically illuminate and confirm
your selection. To turn off
move to the lowest
the massage functions,
position before
starting a massage simply press the button
program. After initial again. The L.E.D. indicator
use, mechanism will blink while the Shiatsu
massage mechanism
will always park at
returns to its lowest point
lowest position. See
note below regarding and then it will turn off.
parking.
Heat Button
NOTE: The moving
For soothing heat when
massage mechanism
massage is on, simply
always "parks"
press the heat button
or finishes in its
and the corresponding
lowest position. It
red L.E.D. light will
will continue to this
illuminate. To deselect,
position after the
press the button again
power has been
and the corresponding
turned off. If the
L.E.D. light will turn off.
electrical supply is
For your safety, heat
interrupted, when
cannot be turned
power is restored,
on if massage is not
the mechanism will
selected.
"park" or move to its
lowest position.
8
Kneading Shiatsu
Massage Cushion

Kneading Massage

Shiatsu is a deep kneading circular massage. This unit features
a massage mechanism that travels up and down the back of
the cushion.

Mode Button

Choose from 3 preset programs where the massage travels up and
down in a specific area of the back, either Full Back, Upper Back or
Lower Back. To select a program, simply press the Mode button and
the L.E.D. will illuminate the active program. Continue to press the
Mode button until the desired program is selected.
NOTE: There is an approximate 15-minute auto
shut off on the unit for your safety.
9
with Heat