Manual Update From Usb Memory Device - Sharp BD-AMS10A Operation Manual

SETTINGS
Manual Update from USB Memory
Device
The software update function using a USB
memory device is only for customer service
representatives.
CAUTION
• Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
When you insert or remove a USB memory device,
be sure to turn the main power off and make sure
that "Quick Start" is set to "No" (See page 45).
1
Insert the USB memory device with the update
file into the USB1 or USB2 terminal on this
player.
• It is recommended that the USB memory device be
connected to the USB2 terminal on the front of the
player.
Front
USB2 terminal
2 Press B to turn on the power.
3 Press c/d to select "Settings", then press b or
ENTER.
Press c/d to select "Software Update
4
Settings", then press b or ENTER.
Press a/b to select "Manual Update", then
5
press d or ENTER.
Press a/b to select "USB Memory", then press
6
ENTER.
• If you have not yet set the PIN code, go to step 8.
7
Enter the 4-digit number using 0–9.
8
Press ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
USB memory
device
9
During the data checking, "Checking" blinks.
Now checking the data in USB memory device.
• The current version of this unit software and the
version of the update file on the USB memory
device are displayed. To update this player software
with update file, select "Yes", and press ENTER.
Software update file is detected in the USB memory device.
Start update?
Current Ver. :
Update Ver. :
Enter 4-digit PIN code
OK
Checking
xxxxxxxxxx
yyyyyyyyyy
Yes
No
(Continued on the next page)
53